• 首页 | 期刊简介 | 编委会 | 投稿须知 | 出版道德规范 | 下载专区 | English
基于损伤容限设计的同步辐射装置挡光元件热疲劳寿命分析
Analysis of Thermal Fatigue Life for High Load Component at Synchrotron Radiation facility based on Damage Tolerance
投稿时间:2021-06-12  修订日期:2021-07-06
DOI:
中文关键词:  热疲劳  损伤容限  疲劳寿命预测  挡光元件  有限元模拟
英文关键词:thermal fatigue  damage tolerance  fatigue life prediction  high heat load component  FEM
基金项目:国家自然科学基金项目(面上项目,重点项目,重大项目)
作者单位邮编
殷琰 西安工程大学 710048
来显凯 西安工程大学 710048
摘要点击次数: 425
全文下载次数: 0
中文摘要:
      以同步辐射装置前端区挡光元件为分析对象,通过低周疲劳实验得到元件制作材料的裂纹扩展速率公式,利用热负载下的典型元件结构的温度和弹塑性应力应变有限元模拟结果,采用损伤容限设计方法并结合Miner线性损伤累积理论进行元件疲劳寿命分析,并据此提出基于损伤容限设计理论的挡光元件热疲劳有限寿命设计方法。结果显示,静强度设计方法过于保守,局部应力应变分析法也有不足,基于损伤容限设计的元件有限寿命设计方法可为装置总体性能的提升提供参考。
英文摘要:
      Low-cycle fatigue experiments were conducted to obtain crack propagation equation of the material for the components at the front end of the synchrotron radiation facility. The temperature and elastoplastic stress-strain are simulated with FEM for a typical high heat load component. In view of damage tolerance design, the crack propagation equation of the material for the component is introduced to predict the fatigue lives, combining with the Miner linear cumulative damage theory. Meanwhile, a thermal fatigue life evaluation method for the high heat load components is ultimately provided. It is reveales that the static strengh design method is too conservative and the local equivalent strain model is not reasonable and comprehensive in engineering. Therefore, the finite life design method based on damage tolerance theroy is accordingly proposed, which aims to improve the current conservative design method and to promote the overall performance of the facility.
  查看/发表评论  下载PDF阅读器
关闭

版权所有:《实验力学》编辑部
您是本站第 63728143 位访问者,今日一共访问22次,当前在线人数: 0
技术支持:本系统由北京勤云科技发展有限公司设计