• 首页 | 期刊简介 | 编委会 | 投稿须知 | 出版道德规范 | 下载专区 | English
高梁,昝祥,李艳,邓华夏,王宇,龚兴龙*.残余应力对柔性薄壁连接结构固有频率的影响[J].实验力学,2024,39(2):149~157
残余应力对柔性薄壁连接结构固有频率的影响
Effect of residual stress on natural frequency of thin-walled component
投稿时间:2023-06-15  修订日期:2023-09-13
DOI:10.7520/1001-4888-24-042
中文关键词:  残余应力  柔性铰链  固有频率
英文关键词:residual stress  flexure hinge  natural frequency
基金项目:国家自然科学基金项目(12372187); 同步辐射联合基金项目(KY2090000097)
作者单位
高梁 中国科学技术大学 近代力学系 中国科学院材料力学行为与设计重点实验室 安徽合肥 230027 
昝祥 合肥工业大学 材料科学与工程学院 安徽合肥 230009 
李艳 合肥工业大学 材料科学与工程学院 安徽合肥 230009 
邓华夏 中国科学技术大学 近代力学系 中国科学院材料力学行为与设计重点实验室 安徽合肥 230027 
王宇 中国科学技术大学 近代力学系 中国科学院材料力学行为与设计重点实验室 安徽合肥 230027 
龚兴龙* 中国科学技术大学 近代力学系 中国科学院材料力学行为与设计重点实验室 安徽合肥 230027 
摘要点击次数: 3268
全文下载次数: 516
中文摘要:
      对于光束线系统中的精密部件而言,线切割加工过程往往会造成部件表面产生残余应力,从而使得精密部件的振动特性与设计预期产生偏差,影响电子束流的稳定性。本文通过对柔性薄壁连接试件固有频率的测量,结合数字图像相关方法和有损切割法对薄壁连接处残余应力进行分析,并结合有限元法分析了残余应力对柔性薄壁连接试件的固有频率影响,从而对光束线系统中柔性铰链部件的固有频率与设计值的偏差进行了探究,研究结果可为柔性薄壁连接部件振动特性设计提供依据。
英文摘要:
      For precision components in synchrotron radiation light source, the wire EDM often induces residual stresses on the component surfaces, leading to deviations from the expected vibration characteristics in the design, which can affect the stability of the electron beam. This paper measured the natural frequency of a flexure thin-walled connection specimen, and analyzed the residual stress at the flexure hinges using both the digital image correlation method and the notching method. Furthermore, the finite element method was employed to probe into the effect of residual stress on the natural frequency of the flexure hinge. The investigation helps to explore the deviation between the measured flexure hinge and the designed one and offers a design foundation for understanding the vibration characteristics of the thin-walled components.
查看全文  下载PDF阅读器
关闭

网站版权:《实验力学》编辑部
您是本站第 65544942 位访问者,今日一共访问288次,当前在线人数: 0
技术支持:本系统由北京勤云科技发展有限公司设计