• 首页 | 期刊简介 | 编委会 | 投稿须知 | 出版道德规范 | 下载专区 | English
王利民*,孙明远,代祥俊,卢俊杰,张东焕,贺光宗,刘灿昌,戈晓霞.混凝土断裂过程及尺寸效应分析[J].实验力学,2008,23(1):34~42
混凝土断裂过程及尺寸效应分析
Analysis of Concrete Fracture Process and Size Effect
  修订日期:2008-01-15
DOI:
中文关键词:  混凝土断裂过程  应变片电测实验  应力强度因子  双K断裂准则  结构承载力
英文关键词:concrete fracture process  electrical measurement experiment with strain gages  stress intensity factor  double-K criterion  structure bearing capacity
基金项目:国家自然科学基金(10272068)和山东省自然基金(Y2006A29)资助
作者单位
王利民* 山东理工大学 交通与车辆工程学院力学部 山东淄博 255049 
孙明远 山东理工大学 交通与车辆工程学院力学部 山东淄博 255049 
代祥俊 山东理工大学 交通与车辆工程学院力学部 山东淄博 255049 
卢俊杰 山东理工大学 交通与车辆工程学院力学部 山东淄博 255049 日照市工业学校 山东日照 262300 
张东焕 山东理工大学 交通与车辆工程学院力学部 山东淄博 255049 
贺光宗 山东理工大学 交通与车辆工程学院力学部 山东淄博 255049 
刘灿昌 山东理工大学 交通与车辆工程学院力学部 山东淄博 255049 
戈晓霞 山东理工大学 交通与车辆工程学院力学部 山东淄博 255049 
摘要点击次数: 228
全文下载次数: 208
中文摘要:
      为研究混凝土裂纹断裂过程和最大承载力计算方法,通过实验机对四种不同尺寸混凝土紧凑拉伸断裂试件进行了加载过程实验,并对其中一个试件进行应变片跟踪测试。由实验结果分析得到了一系列关系曲线,如试件的载荷-加载点位移关系曲线,断裂损伤区变形随载荷变化曲线;并且计算了不同尺寸断裂试件的应力强度因子。结合计算粘聚裂纹应力强度因子的公式与断裂准则,完成了对承载力理论值的计算,并将其与实验峰值平均值进行对比,其结果是两者相比误差较小,表明此种计算裂纹结构最大承载力方法是可行的。
英文摘要:
      In order to investigate fracture process of concrete crack and calculation method of specimen's maximum bearing capacity, concrete compact tension fracture specimens, which had four different sizes, were tested, and one of the specimens was measured by electrical strain gages equipment. Based on experimental results, a series of curves were obtained and analyzed, such as curves of loading point displacement vs variable loading on the typical specimens, and curves of fracture damaged area deformation vs loading. The stress intensity factor of specimens with different size fracture was calculated. For specimens with different sizes, the computation method of structure bearing capacity was presented through the stress intensity factor's computation formula and the fracture criterion. The calculated value of this theoretical method was compared with the experimental mean peak values, and the relative error of them is small. This indicates that the method of estimating structures' maximum bearing capacity is feasible.
查看全文  下载PDF阅读器
关闭

网站版权:《实验力学》编辑部
您是本站第 65668355 位访问者,今日一共访问760次,当前在线人数: 0
技术支持:本系统由北京勤云科技发展有限公司设计