• 首页 | 期刊简介 | 编委会 | 投稿须知 | 出版道德规范 | 下载专区 | English
王志海,李永池*,余育苗,刘原栋.三向Kevlar编织纤维材料抗弹性能实验研究[J].实验力学,2008,23(4):298~304
三向Kevlar编织纤维材料抗弹性能实验研究
Experimental Study on Ballistic Resistance Property of 3D Kevlar Woven Composites
投稿时间:2008-07-17  修订日期:2008-08-05
DOI:
中文关键词:  3DKW复合材料  抗弹性能  弹道极限  能量分析工程模型
英文关键词:3DKW composite  ballistic resistance property  ballistic limit  engineering energy analysis method
基金项目:武器装备预研基金资助(51453030205ZK0101)和国家自然科学基金(10572134)
作者单位
王志海 中国科学技术大学 近代力学系 安徽合肥 230027 
李永池* 中国科学技术大学 近代力学系 安徽合肥 230027 
余育苗 中国科学技术大学 近代力学系 安徽合肥 230027 
刘原栋 中国科学技术大学 近代力学系 安徽合肥 230027 
摘要点击次数: 251
全文下载次数: 172
中文摘要:
      通过对三向Kevlar纤维增强(3DKW)复合材料的系列抗弹实验,研究了不同厚度靶的抗弹性能。通过“跨界速度区”方法直接测定了靶材的弹道极限V50值;在分析完全贯穿区实验数据的基础上,对靶材抗标准模拟钢球弹的贯穿耗能E和靶板面密度Fp的关系进行了总结,求得了材料单位面密度的耗能因子λ,并对靶材的弹道极限速度V50的值进行了预估;提出了一种改进的能量分析工程模型,以该模型和完全贯穿实验数据为基础,得到了靶材的弹道极限V50值。本文对V50值的预测与实验结果良好符合。
英文摘要:
      By a series of ballistic experiments of three Dimensional orthogonal Kevlar Woven (3DKW) composite targets, the ballistic resistance properties of 3DKW targets with different thickness were investigated; the value of ballistic limit V50 was directly deduced by “Trans-critical velocity zone” method. Based on experimental data of whole penetration-zone, the relation of consumption energy of 3DKW target penetrated by a standard steel ball E and plane-density of target Fp was summarized, and the value of consumption energy factor per plane-density λ was obtained, moreover the value of ballistic limits V50 was forecasted. Furthermore, an improved engineering energy analysis model was presented. Based on the modified model and the experimental data, the ballistic limits V50 of 3DKW target were obtained. All forecasted values of V50 are in good agreement with the experimental results.
查看全文  下载PDF阅读器
关闭

网站版权:《实验力学》编辑部
您是本站第 65490286 位访问者,今日一共访问196次,当前在线人数: 0
技术支持:本系统由北京勤云科技发展有限公司设计