| 徐松林*,张侃,郑文,刘永贵,邓向允.高孔隙率Al2O3微孔陶瓷冲击性能实验研究[J].实验力学,2008,23(6):525~532 |
| 高孔隙率Al2O3微孔陶瓷冲击性能实验研究 |
| Experimental Study of Impact Performance of Al2O3 Microvoid Ceramics with High Porosity |
| 修订日期：2008-10-24 |
| DOI： |
| 中文关键词: 冲击动力学； 实验研究； Al2O3陶瓷 高孔隙率 微孔 |
| 英文关键词:impact dynamics experimental study Al2O3 ceramics high porosity microvoid |
| 基金项目:国家自然科学基金（No.10672157）资助项目 |
|
| 摘要点击次数: 480 |
| 全文下载次数: 434 |
| 中文摘要: |
| 为研究脆性材料冲击损伤性能，对孔隙尺寸μm量级、孔隙率47%~50%的Al2O3微孔陶瓷进行了较系统的实验研究。通过对其进行应变率范围为25.4～494 s-1的冲击实验，结果表明：在较低加载率情况下，材料的模量和强度均表现出较明显的应变率敏感效应；随着加载速率的增加，强度和模量的应变率效应规律相反；而到更高的加载速率时，材料表现出应变率不敏感。借助试件表面的应变花，并与双波法实验结果进行对比，初步探讨了脆性材料在多次冲击下的累积损伤。 |
| 英文摘要: |
| In order to study dynamic damage characteristics of brittle materials, systematical experiments were carried out to investigate the impact behaviors of Al2O3 ceramics with 47%~50% porosity and μm scale void. In experiment the strain rate was ranging from 25.4s-1 to 494s-1. Results show that under lower strain rates (i.e., from 25s-1 to 60s-1), the material is rate-sensitive, both modulus and the strength increase with the loading rate increasing; while under the moderate strain rate, the modulus decrease with the loading rate increasing, but the strength increases slightly with the loading rate increasing; and under higher rates, the material appears rate-insensitive. Accumulated damage of brittle materials under repeated impact loadings is preliminarily discussed based on comparison of measured results from gauges attached to specimen surface with the calculated results based on “double-wave method”. |
| 查看全文 下载PDF阅读器 |
| 关闭 |
