倪凡,杨国标*,李斌.集中力作用下铝合金材料内部柱状缺陷检测的研究[J].实验力学,2010,25(2):181~185 |
集中力作用下铝合金材料内部柱状缺陷检测的研究 |
Investigation on the Detecting of Column Defects in Aluminum Alloy Acted by Concentrated Force |
投稿时间:2009-09-17 修订日期:2009-12-27 |
DOI: |
中文关键词: 缺陷 电子散斑干涉法 离面位移 集中载荷 |
英文关键词:defect electrical speckle pattern interferometry off-plane displacement concentrated force |
基金项目:国家自然基金资助项目(10672124);上海市重点学科建设项目 |
|
摘要点击次数: 521 |
全文下载次数: 278 |
中文摘要: |
工程中,构件的内部会因为各种原因不可避免地存在各种损伤或缺陷。本文通过弹性力学理论给出含柱状缺陷的铝合金材料在受到集中力作用下的离面位移场。同时运用电子散斑干涉方法成功地测量出试件缺陷覆盖层在受到集中力情况下的离面位移。理论和实验结果对比表明,利用电子散斑干涉术技术能够精确地测量含缺陷材料表面的离面位移。此实验方法可以作为一种新型的探测物体内部缺陷所处的位置和大小的评估办法。 |
英文摘要: |
In engineering practice, a variety of damage or defect exists in the inner part of components due to diversified and inevitable reasons. Off-plane displacement on defects was calculated by elasticity theory under load of concentrated force. Then off-plane displacement field on defects under load of concentrated force was successfully measured by method of electrical speckle pattern of interferometry (ESPI). Off-plane displacement field on defects can be accurately measured by ESPI. It is fully proved by comparison between experimental results and theoretical results. So, with proper model and sufficient data from experiment, this method may be used as a new method to evaluate the position and size of defect. |
查看全文 下载PDF阅读器 |
关闭 |