• 首页 | 期刊简介 | 编委会 | 投稿须知 | 出版道德规范 | 下载专区 | English
周志伟,王志华,赵隆茂,树学峰*.航空用芳纶纸蜂窝各向异性行为研究[J].实验力学,2012,27(4):440~447
航空用芳纶纸蜂窝各向异性行为研究
Anisotropic Behaviors of Nomex Hoenycombs
投稿时间:2011-11-08  修订日期:2012-02-08
DOI:
中文关键词:  芳纶纸蜂窝  压剪复合加载  各向异性行为
英文关键词:aramid paper (Nomex) hoenycombs  combined compression-shear loading  anisotropic behaviors
基金项目:国家自然科学基金资助项目(No.11172195),山西省国际科技合作项目(2010081016),山西省回国留学人员科研资助项目(200830),太原市科技项目(10011607)
作者单位
周志伟 太原理工大学 应用力学与生物医学工程研究所, 太原 030024 
王志华 太原理工大学 应用力学与生物医学工程研究所, 太原 030024 
赵隆茂 太原理工大学 应用力学与生物医学工程研究所, 太原 030024 
树学峰* 太原理工大学 应用力学与生物医学工程研究所, 太原 030024 
摘要点击次数: 1623
全文下载次数: 803
中文摘要:
      采用Arcan加载装置对航空用芳纶纸蜂窝试件进行一系列面外压剪复合加载实验,以此研究材料各向异性行为。实验结果表明:随着面内方向角增加,芳纶纸蜂窝面内等效剪切模量、等效剪切强度显著减小,实验屈服面显著扩张,材料表现出明显的各向异性。基于实验结果,确定了测试蜂窝面内等效剪切模量、等效剪切强度上下限值及其比值关系,并与理论值进行比较。一个适用于各向异性材料的屈服准则与实验屈服面进行比较,比较结果表明:屈服准则能大致描述蜂窝各向异性屈服行为。
英文摘要:
      In order to investigate anisotropic behaviors, a series of combined compression and shear loading experiments out-plane for aerospace Nomex honeycomb specimens were conducted by using ARCAN loading device. Experimental results indicate that the in-plane orientation angle has significant influence on in-plane equivalent shear modulus, equivalent shear strength (both amount are significantly reduced), and initial yield surface (significantly expansed). This material presents obvious anisotropic. Based on experimental results, the upper and lower limits and ratio for equivalent shear strength and equivalent shear modulus were determined and compared with theoretical results. A phenomenological yield criterion for anisotropic materials was compared with experimental initial yield surface. Results show that experimental initial yield surface of tested specimens is approximately consistent with theoretical yield surface, which indicates that the phenomenological yield criteria can properly describe the development of experimental yield surface of tested honeycomb.
查看全文  下载PDF阅读器
关闭

网站版权:《实验力学》编辑部
您是本站第 65668745 位访问者,今日一共访问955次,当前在线人数: 0
技术支持:本系统由北京勤云科技发展有限公司设计