| 刘迎彬*,沈兆武,刘天生,胡晓艳,孙素杰.钨铜药型罩制备及其侵彻性能研究[J].实验力学,2012,27(5):618~622 |
| 钨铜药型罩制备及其侵彻性能研究 |
| On the Preparation and Penetration Performance of Tungsten-Copper Shaped Charge Liner |
| 投稿时间：2011-12-10 修订日期：2012-05-09 |
| DOI： |
| 中文关键词: 钨铜药型罩 聚能装药 聚能粒子流 |
| 英文关键词:W-Cu shaped charge liner shaped charge shaped charge granular jet |
| 基金项目:国家自然科学基金(11072222)(51174183)和(51134012)资助 |
|
| 摘要点击次数: 110647 |
| 全文下载次数: 1135 |
| 中文摘要: |
| 为了提高钨铜药型罩的侵彻性能和稳定性,在传统钨铜制备方法的基础上,采用机械合金化方法进行混粉,利用旋模压制方法进行压制药型罩毛坯,再在甲醇裂解气体的保护下进行烧结,最终制备出钨铜药型罩。利用排水法测试了烧结前后钨铜药型罩的密度。并将制备出的钨铜药型罩与紫铜板药型罩进行侵彻性能的实验比较。实验结果表明:钨铜药型罩烧结后的密度比烧结前的密度要低一些,但其对603均质装甲钢的侵彻性能要优于紫铜板药型罩的侵彻性能,与紫铜板药型罩相比,其穿深可以提高45%。 |
| 英文摘要: |
| In order to improve the penetration performance and stability of tungsten-copper shaped charge liner, a new W-Cu shaped charge liner was prepared. Based on the traditional tungsten-copper preparation method, a series of new technology was adopted including using mechanical alloying method to mix powder, using spin-mode suppression method to press the blank of shaped charge liner then sintered under the protection of methanol cracking gas. Density of W-Cu shaped charge liner before and after sintering was tested by drainage method. The penetration performance was compared experimentally between the W-Cu shaped charge liner and the copper plate shaped charge liner. Results show that the density of W-Cu shaped charge liner after sintering is lower than the density before sintering; for 603 homogeneous armor steel plate, the penetration performance of W-Cu shaped charge liner is superior to copper shaped charge liner, and the penetration depth increases up to 45% compared with copper plate shaped charge liner. |
| 查看全文 下载PDF阅读器 |
| 关闭 |
|
|
|
|
|
