• 首页 | 期刊简介 | 编委会 | 投稿须知 | 出版道德规范 | 下载专区 | English
范俊奇*,董宏晓,高永红,楼梦麟.全长注浆锚杆锚固段剪应力分布特征试验研究[J].实验力学,2014,29(2):250~256
全长注浆锚杆锚固段剪应力分布特征试验研究
Experimental Study of Shear Stress Distribution in Internal Anchoring Section of a Full-length Grouting Anchor
投稿时间:2013-05-05  修订日期:2013-11-25
DOI:10.7520/1001-4888-12-063
中文关键词:  全长注浆锚杆  内锚固段  剪应力分布  试验研究
英文关键词:full-length grouting anchor  internal anchoring section  shear stress distribution  experimental study
基金项目:国家自然科学基金资助项目(51278492)
作者单位
范俊奇* 1.总参工程兵科研三所, 洛阳 471023 2.同济大学土木工程防灾国家重点实验室, 上海 200092 
董宏晓 总参工程兵科研三所, 洛阳 471023 
高永红 1.总参工程兵科研三所, 洛阳 471023 2.同济大学土木工程防灾国家重点实验室, 上海 200092 
楼梦麟 同济大学土木工程防灾国家重点实验室, 上海 200092 
摘要点击次数: 1303
全文下载次数: 535
中文摘要:
      通过WES-50B型万能材料试验机对分别模拟高、中、低三种强度围岩介质的锚杆模型进行了拉拔试验。结果表明,锚杆锚固段的轴应变及第一、第二交界面的粘结应力分布按照负指数规律衰减。根据模型试验所得锚杆体轴应变试验结果,在一定简化假设的基础上,推导了以锚杆为代表的锚固结构轴力及第一、第二界面剪应力分布公式,分析了锚固结构在均匀介质中内锚固段应力、轴力及交界面的剪应力传递、衰减规律,探讨了拉拔力及介质强度对锚固段剪应力的影响。本文的研究为通过模型试验分析以锚杆为代表的锚固结构第一、第二界面剪应力分布提供了参考。
英文摘要:
      Drawing experiment of anchor model in simulated surrounding rock medium with high, medium and low intensity was carried out respectively by using universal test machine WES-50B. Results indicate that the distribution of axial strain in anchoring section and bond stress at the first and second interface decays in accordance with the law of negative index. Based on model experimental results of anchor body axial strain and certain simplifying assumptions, formulae about axis force of anchoring structure and shear stress distribution at the first and second interface were derived. The stress in internal anchoring section, the axial force and the shear stress transfer and attenuation in homogeneous medium were analyzed. Above results may provide a reference for experimental analysis of shear stress distribution at the first and second interface of anchoring section.
查看全文  下载PDF阅读器
关闭

网站版权:《实验力学》编辑部
您是本站第 65668691 位访问者,今日一共访问928次,当前在线人数: 0
技术支持:本系统由北京勤云科技发展有限公司设计