• 首页 | 期刊简介 | 编委会 | 投稿须知 | 出版道德规范 | 下载专区 | English
朱飞鹏*,王京荣,雷冬,何小元.三维DIC在GFRP锚杆拉伸力学性能测试中的应用[J].实验力学,2014,29(3):302~309
三维DIC在GFRP锚杆拉伸力学性能测试中的应用
Application of 3D-DIC in Tensile Mechanical Properties Test for Glass Fiber Reinforced Plastic Bolt
投稿时间:2013-07-28  修订日期:2013-12-09
DOI:10.7520/1001-4888-13-117
中文关键词:  三维数字图像相关  弹性模量  玻璃纤维增强塑料  引伸计  抗拉强度  延伸率
英文关键词:three-dimensional digital image correlation (3D-DIC)  modulus of elasticity  glass fiber reinforced plastic (GFRP)  extensometer  tensile strength  elongation percentage
基金项目:国家自然科学基金(11002048)资助
作者单位
朱飞鹏* 河海大学力学与材料学院, 南京 210098 
王京荣 河海大学力学与材料学院, 南京 210098 
雷冬 河海大学力学与材料学院, 南京 210098 
何小元 东南大学工程力学系, 南京 210096 
摘要点击次数: 3203
全文下载次数: 2427
中文摘要:
      随着玻璃纤维增强塑料(GFRP)广泛运用于轨道交通及边坡加固中,其力学性能的测试显得尤为重要。基于三维数字图像相关(DIC)方法,研究了三种不同加载速率下GFRP锚杆的拉伸力学性能,分别得到了应力-应变曲线及弹性模量、抗拉强度、最大力总延伸率等参数。实验结果表明,螺旋状变截面锚杆的轴向应变呈非均匀分布,由三维DIC得到的锚杆弹性模量结果一致性优于传统的接触式引伸计方法,GFRP锚杆几乎呈线性分布的应力-应变曲线表明该材料为典型的脆性材料。
英文摘要:
      With glass fiber reinforced plastic (GFRP) is widely applied in rail traffic and slope reinforcement, its mechanical property measurement becomes particularly important. Based on three-dimensional digital image correlation (3D-DIC) technique, tensile mechanical properties of GFRP bolt subjected to three different loading rates were studied and parameters such as stress-strain curve, modulus of elasticity, tensile strength and total elongation percentage produced by maximum force were obtained respectively. Exprimental results indicate that the axial strain distribution of spiral specimen with variable cross-section is nonuniform. Modulus of elasticity result consistency of GFRP bolts obtained from 3D-DIC is better than that from conventional contact extensometer method, and the almost linear stress-strain curve of GFRP bolt indicates that this is a typical brittle material.
查看全文  下载PDF阅读器
关闭

网站版权:《实验力学》编辑部
您是本站第 65667273 位访问者,今日一共访问218次,当前在线人数: 0
技术支持:本系统由北京勤云科技发展有限公司设计