• 首页 | 期刊简介 | 编委会 | 投稿须知 | 出版道德规范 | 下载专区 | English
程树良,严雪松,杜顺禹,辛亚军*,李慧剑.铝蜂窝-铅复合阻尼器的试验研究[J].实验力学,2016,31(2):209~216
铝蜂窝-铅复合阻尼器的试验研究
Experimental Study of Cellular Aluminum Lead Composite Damper
投稿时间:2015-07-29  修订日期:2015-11-18
DOI:10.7520/1001-4888-15-130
中文关键词:  复合阻尼器  蜂窝铝-铅阻尼器  耗能  滞回性能
英文关键词:composite damper  cellular aluminum-lead damper  energy consumption  hysteretic behavior
基金项目:河北省自然科学基金项目(E2013203183); 住建部科技项目(2013-K2-2); 燕山大学青年教师自主研究计划(13LGA013)
作者单位
程树良 燕山大学 河北省重型装备与大型结构力学可靠性重点实验室 秦皇岛 066004 
严雪松 燕山大学 河北省重型装备与大型结构力学可靠性重点实验室 秦皇岛 066004 
杜顺禹 燕山大学 河北省重型装备与大型结构力学可靠性重点实验室 秦皇岛 066004 
辛亚军* 燕山大学 河北省重型装备与大型结构力学可靠性重点实验室 秦皇岛 066004 
李慧剑 燕山大学 河北省重型装备与大型结构力学可靠性重点实验室 秦皇岛 066004 
摘要点击次数: 822
全文下载次数: 511
中文摘要:
      提出一种铝蜂窝-铅复合阻尼器,设计了2种类型的6个不同参数阻尼器试件,通过低周循环试验研究了其力学性能,揭示它的工作原理和耗能机制,分析了不同参数阻尼器的等效阻尼比、最大剪应力、存储剪切模量、骨架线等性能参数。结果表明,铝蜂窝-铅复合阻尼器具有屈服位移小、变形能力大、工作性能稳定与耗能性能好等特点,同时具有造价低廉、构造简单、安装方便的优点。相对A型阻尼器,B型阻尼器变形能力大,工作稳定,耗能性能优越。对于阻尼器的等效阻尼比、最大剪应力和存储剪切模量等参数,铝蜂窝/铅复合体的方向、高度和孔棱大小影响较大,复合体的片数影响很小。
英文摘要:
      A kind of cellular aluminum-lead composite damper is proposed in this paper. Two types of such damper and 6 damper specimens with different parameters were designed. Through low cycle experiment, its mechanical properties, working principle and energy consumption mechanism were studied. The performance parameters such as equivalent damping ratio, maximum shear stress, storage shear modulus and skeleton line of dampers with different parameters were analyzed. Results show that the cellular aluminum-lead composite damper has characteristics of small yield displacement, big deformation ability, stable working performance and good energy consumption. At the same time, this kind of damper has advantages of low cost, simple structure and easy installation. Compared with type-A damper, type-B damper has more stable working performance, better deformation ability and superior energy consumption. The direction and height of cellular aluminum-lead composite body and the hole edge size have significant impact on the equivalent damping ratio, maximum shear stress and storage shear modulus of damper. However, the number of composite body has little effect on them.
查看全文  下载PDF阅读器
关闭

网站版权:《实验力学》编辑部
您是本站第 65668707 位访问者,今日一共访问936次,当前在线人数: 0
技术支持:本系统由北京勤云科技发展有限公司设计