• 首页 | 期刊简介 | 编委会 | 投稿须知 | 出版道德规范 | 下载专区 | English
张治君*,何石,王龙,李益萱.基于真空吸盘的新型振动加载技术研究及应用[J].实验力学,2016,31(4):543~549
基于真空吸盘的新型振动加载技术研究及应用
Study of a New Vibration Loading Technology Based on Vacuum Grip Device and its Application
投稿时间:2015-12-15  修订日期:2016-01-18
DOI:10.7520/1001-4888-15-239
中文关键词:  真空吸盘  加载技术  振动试验  动态疲劳
英文关键词:vacuum grip device  loading technology  vibration experiment  dynamic fatigue
基金项目:
作者单位
张治君* 1.中国飞机强度研究所, 陕西西安 710065
2.航空噪声与动强度航空科技重点实验室, 陕西西安 710065 
何石 中国飞机强度研究所, 陕西西安 710065 
王龙 中国飞机强度研究所, 陕西西安 710065 
李益萱 1.中国飞机强度研究所, 陕西西安 710065
2.航空噪声与动强度航空科技重点实验室, 陕西西安 710065 
摘要点击次数: 1056
全文下载次数: 437
中文摘要:
      传统的振动加载技术,试件通过刚性夹具与振动台台面进行连接,刚性夹具采用螺栓与振动台台面和试件进行连接。一些试验要求振动加载装置的连接不能破坏试件结构,传统的螺栓方式不能满足要求。本文研究了一种基于真空吸盘的新型振动加载技术,振动加载杆通过真空吸盘吸附在试件表面。该项技术已在垂尾结构的动态疲劳试验中得到应用。应用实践证明,这种基于真空吸盘的振动加载技术方便、可靠、安全,弥补了传统加载方式的不足。
英文摘要:
      In traditional vibration loading technology, test piece is connected with vibration table top through rigid clamp, while rigid clamp is connected with test piece and vibration table top through screw bolts. But some experiments require that the connection of vibration loading device can not destroy the structure of test piece, so the traditional screw bolt connection method can not meet the requirement. A new vibration loading technology based on vacuum grip device was studied and its details are presented in this paper. In this loading method, the vibration loading rod is adsorbed on the surface of test piece through a vacuum suction cup, without any bolts. This technique has been applied in aircraft vertical fin dynamic fatigue experiment. Application practice indicates that this vibration loading technology based on vacuum grip device is convenient, reliable and safe, which makes up for the deficiency of traditional loading method.
查看全文  下载PDF阅读器
关闭

版权所有:《实验力学》编辑部
您是本站第 65193351 位访问者,今日一共访问651次,当前在线人数: 0
技术支持:本系统由北京勤云科技发展有限公司设计