• 首页 | 期刊简介 | 编委会 | 投稿须知 | 出版道德规范 | 下载专区 | English
辛亚军,肖博,程树良*,李慧剑.泡沫铝夹芯梁四点弯曲性能试验研究[J].实验力学,2016,31(5):593~599
泡沫铝夹芯梁四点弯曲性能试验研究
Experimental Study of Four-point Bending Performance of Aluminum Foam Sandwich Beam
投稿时间:2015-12-01  修订日期:2016-02-21
DOI:10.7520/1001-4888-15-231
中文关键词:  准静态四点弯曲  泡沫铝  夹芯梁  失效模式  弯曲承载力
英文关键词:quasi-static four-point bending tests  aluminum foam  sandwich beam  failure mode  bending bearing capacity
基金项目:河北省自然科学基金项目(E2013203183);住建部科技项目(2013-K2-2)
作者单位
辛亚军 燕山大学 河北省重型装备与大型结构力学可靠性重点实验室, 秦皇岛 066004 
肖博 燕山大学 河北省重型装备与大型结构力学可靠性重点实验室, 秦皇岛 066004 
程树良* 燕山大学 河北省重型装备与大型结构力学可靠性重点实验室, 秦皇岛 066004 
李慧剑 燕山大学 河北省重型装备与大型结构力学可靠性重点实验室, 秦皇岛 066004 
摘要点击次数: 1112
全文下载次数: 619
中文摘要:
      通过准静态四点弯曲试验对泡沫铝夹芯梁的弯曲力学性能进行了测试,研究了它的破坏过程、破坏形态和典型荷载-位移曲线,分析了芯层厚度和面层厚度等参数对其弯曲力学性能的影响。结果表明,泡沫铝夹芯梁四点弯曲破坏过程历经三个阶段,呈现三种失效模式:整体弯曲破坏、局部屈曲破坏以及整体屈曲破坏;芯层厚度和面层厚度对夹芯梁的弯曲承载力和吸能效果有明显影响;在本试验参数范围内,芯层厚度为25mm,面层厚度为0.4mm时,夹芯梁具有最优弯曲力学性能。
英文摘要:
      Quasi-static four-point bending experiment was carried out to investigate the flexural performance of aluminum foam sandwich beam. The destruction process, failure mode and typical force-displacement curve were studied. The impact of parameters such as core layer thickness and surface layer thickness on the flexural performance of lauminum foam sandwich beam was analyzed. Results indicate that the four-point bending destruction process of aluminum foam sandwich beam undergoes three stages and presents three failure modes: overall bending failure, local buckling failure and overall buckling failure, respectively. The impact of core layer thickness and surface layer thickness of sandwich beam on maximum bending bearing capacity and energy absorption capacity is very obvious. In the range of parameters used in this experiment, when the core layer thickness is 25mm and surface layer thickness is 0.4mm, the aluminum sandwich beam presents the optimal flexural performance.
查看全文  下载PDF阅读器
关闭

版权所有:《实验力学》编辑部
您是本站第 65192750 位访问者,今日一共访问340次,当前在线人数: 0
技术支持:本系统由北京勤云科技发展有限公司设计