杨康,吴振*,高双胜,王吉.复合材料层合板单搭胶接力学性能检测技术与分析[J].实验力学,2016,31(5):664~672 |
复合材料层合板单搭胶接力学性能检测技术与分析 |
On the Mechanical Properties Detection Technology and Analysis of Composite Laminated Plate with Single-Lap Adhesive Bonding |
投稿时间:2016-01-16 修订日期:2016-03-10 |
DOI:10.7520/1001-4888-16-010 |
中文关键词: 复合材料层合板 单搭接 胶接 喷水穿透法 |
英文关键词:composite laminated plate single-lap adhesive bonding water jet penetration method |
基金项目:国家自然科学基金(No.11272217), 辽宁省自然科学基金计划(2013024018), 先进焊接与连接国家重点实验室开放课题研究基金(AWJ-M13-05) |
|
摘要点击次数: 1239 |
全文下载次数: 507 |
中文摘要: |
胶接工艺缺陷对单搭胶接接头的拉伸剪切性能有着重要的影响。为了研究不同单搭接胶接层厚度对不同材质复合材料层合板胶接性能的影响规律,通过喷水穿透法超声C扫描对试样的剪切区域进行无损检测,并分别采用1mm、2mm、4mm的胶层厚度,以碳纤维/玻璃纤维复合材料层合板为被粘物,进行单搭胶接拉伸剪切性能试验。检测及试验结果表明:当胶层厚度h>1mm时,对于相同材料的被粘物,胶层厚度越大,试件胶接接头剪切强度越小;相同的粘接剂厚度,以碳纤维增强复合材料板为被粘物的试件胶接接头剪切强度大于以玻纤增强复合材料板为被粘物的试件胶接接头强度;胶粘剂与碳纤维被粘物表面的润湿效果要优于胶粘剂与玻纤被粘物表面的润湿效果。 |
英文摘要: |
Bonding process defects have important effect on tensile and shear properties of single-lap adhesive bonding joint. In order to study the effect of single-lap adhesive layer thickness on bonding performance of different composite laminated plates, using ultrasonic C scan of water jet penetration method to nondestructively examine the shear area of specimen, adopting three adhesive layer thicknesses (1mm, 2mm, 4mm) and carbon fiber/glass fiber composite laminate as the object to be bonded, experiment of tensile and shear properties of single-lap adhesive bonding joint was carried out. Detection and experimental results show that when the layer thickness h is larger than 1mm, for the same material to be bonded, the thicker the adhesive layer is, the less the shear strength of adhesive bonding joint; for the same adhesive thickness, the shear strength of carbon fiber enhanced composite is larger than that of glass fiber enhanced composite. The surface wetting effect for adhesive and carbon fiber interface is better than that of interface of adhesive and glass fiber. |
查看全文 下载PDF阅读器 |
关闭 |