| 刘洋,何晓聪*,邓聪.粘接剂对钛合金异质自冲铆接头力学性能的影响[J].实验力学,2017,32(1):131~136 |
| 粘接剂对钛合金异质自冲铆接头力学性能的影响 |
| On the Impact of Adhesive Agent on Mechanical Properties of Heterogeneous Self-Piercing Riveted Titanium Alloy Joint |
| 投稿时间：2016-09-26 修订日期：2016-11-03 |
| DOI：10.7520/1001-4888-16-188 |
| 中文关键词: TA1钛合金 自冲铆 粘接 静力学试验 能量吸收 |
| 英文关键词:TA1 titanium alloy self-piercing riveting(SPR) adhesive static tests energy absorption |
| 基金项目:国家自然科学基金 (51565023, 51565022); 云南省教育厅科学研究基金重大专项 (ZD201504) |
|
| 摘要点击次数: 979 |
| 全文下载次数: 473 |
| 中文摘要: |
| 为了研究粘接剂对自冲铆接头性能的影响，分别以TA1-5052和TA1-Q215的单搭自冲铆接头及粘接-自冲铆复合接头为研究对象,采用剖面直观检测法分析接头成形质量，基于静力学试验研究各组接头的静力学性能及失效形式。结果表明：与自冲铆接头相比，复合接头的钉脚张开度和残余底厚值减小;粘接剂对TA1-5052单搭自冲铆接头失效形式无影响，但改变了TA1-Q215单搭自冲铆接头的失效形式;复合接头的静力学性能比自冲铆接头更优;相对于自冲铆接头，TA1-5052复合接头静失效载荷增加了17.5%，能量吸收值增加了13.3%;TA1-Q215复合接头静失效载荷增加了6.8%，能量吸收值增加了25.8%。 |
| 英文摘要: |
| In order to investigate the impact of adhesive agent on performance of self-piercing riveted (SPR) joint, taking both TA1-5052 and TA1-Q215 single-lap SPR alloy joint and adhesive bonded-SPR joint as study objects, adopting cross-section direct visual inspection method for analyzing joint forming quality, experimental study of joint static performance and failure mode was carried out based on static mechanics. Results show that comparing with single-lap SPR joint, the pin opening and residual bottom thickness of adhesive bonded-SPR joint decrease; The adhesive agent has no impact on the failure mode of TA1-5052 single-lap SPR joint, but changes the failure mode of adhesive bonded-SPR joint; The static performance of adhesive bonded-SPR joint is better than that of single-lap SPR joint; Comparing with SPR joint, the static failure load of TA1-5052 adhesive bonded-SPR joint increases by 17.5%, and its energy absorption value increases by 13.3%; The static failure load of TA1-Q215 adhesive bonded-SPR joint increases by 6.8%, and its energy absorption value of increases by 25.8%. |
| 查看全文 下载PDF阅读器 |
| 关闭 |
