• 首页 | 期刊简介 | 编委会 | 投稿须知 | 出版道德规范 | 下载专区 | English
张明,缪泓*,熊宸,胡文欣,房尚强,杨润森.高温变形测量中热流场造成畸变的修正方法[J].实验力学,2017,32(5):718~724
高温变形测量中热流场造成畸变的修正方法
On the Correction Method for Distortion Caused by Heat Flow in High Temperature Deformation Measurement
投稿时间:2017-07-10  修订日期:2017-09-04
DOI:10.7520/1001-4888-17-307
中文关键词:  自动网格法  光线追迹  热流扰动  流场模拟
英文关键词:automatic mesh method  ray tracing  heat flow disturbance  flow field simulation
基金项目:国家自然科学基金项目(11372182, 11472267, 11732009)
作者单位
张明 中国科学技术大学 中科院材料力学行为和设计重点实验室 安徽合肥 230027 
缪泓* 中国科学技术大学 中科院材料力学行为和设计重点实验室 安徽合肥 230027 
熊宸 中国科学技术大学 中科院材料力学行为和设计重点实验室 安徽合肥 230027 
胡文欣 中国科学技术大学 中科院材料力学行为和设计重点实验室 安徽合肥 230027 
房尚强 中国科学技术大学 中科院材料力学行为和设计重点实验室 安徽合肥 230027 
杨润森 中国科学技术大学 中科院材料力学行为和设计重点实验室 安徽合肥 230027 
摘要点击次数: 1180
全文下载次数: 280
中文摘要:
      目前高温环境中材料的变形测量是研究的热点,基于数字图像特征识别的非接触测量方法促进了高温环境变形测量的发展,但由于高温环境的复杂性,存在很多测量影响因素,其中高温环境中热流场的存在对数字图像法的影响尤为明显。本文提出了一种对高温变形测量中热流场造成畸变影响的修正方法。针对基于光学成像方法的材料高温变形测量中常见的热流场扰动,通过数值仿真得到热流场模型及热流场分布状况,再结合光线追迹原理对热流场造成的图像畸变影响进行分析,用数值分析结果对高温变形测量实验结果进行修正。对比扰动修正结果与真实位移有很好的一致性,从而证明了所提方法的可行性和有效性。
英文摘要:
      A correction method for the distortion caused by heat flow in high temperature deformation measurement is proposed in this paper. Aiming at the common heat flow field disturbance in high temperature deformation measurement of materials based on optical imaging method, the heat flow field model and its distribution are obtained by numerical simulation. Combined with ray tracing principle, the image distortion caused by heat flow field is analyzed. Finally, experimental results of high temperature deformation measurement are corrected by numerical analysis. The feasibility and effectiveness of proposed method are proved by comparing the disturbance corrected result and the true displacement.
查看全文  下载PDF阅读器
关闭

版权所有:《实验力学》编辑部
您是本站第 65195013 位访问者,今日一共访问1553次,当前在线人数: 0
技术支持:本系统由北京勤云科技发展有限公司设计