• 首页 | 期刊简介 | 编委会 | 投稿须知 | 下载专区 | 联系我们 | English
王浩,孙翠茹*,张晓川,陈金龙.基于数字图像相关方法的TiO2/PI纳米杂化薄膜低温力学性能研究[J].实验力学,2018,33(3):343~351
基于数字图像相关方法的TiO2/PI纳米杂化薄膜低温力学性能研究
Study of low temperature mechanical properties of TiO2/PI nano-hybrid thin film based on Digital Image Correlation method
投稿时间: 2017-03-17  最后修改时间: 2017-05-05
DOI:10.7520/1001-4888-17-064
中文关键词:  数字图像相关方法  低温  薄膜  变形测量  力学性能
英文关键词:digital image correlation method, low temperature, films, deformation measurement, mechanical property
基金项目:国家自然科学基金(11472187, 11602166);国家重点基础研究发展计划(2014CB046805);天津市自然科学基金(16JCYBJC40500)资助
作者单位
王浩 天津大学 机械工程学院力学系 天津 300350 
孙翠茹* 1.天津大学 机械工程学院力学系 天津 300350 2.天津市现代工程力学重点实验室 天津 300350 
张晓川 天津商业大学 机械工程学院 天津 300134 
陈金龙 1.天津大学 机械工程学院力学系 天津 300350 2.天津市现代工程力学重点实验室 天津 300350 
摘要点击次数: 198
全文下载次数: 
中文摘要:
      开展基于数字图像相关方法的材料低温变形测试技术的应用性研究,对材料低温力学性能的研究工作具有重要意义。本文首先将数字图像相关方法与低温拉伸系统相结合,建立了一套适用于测量低温环境下薄膜材料全场变形的测试系统。利用该系统测量了纯铜薄膜在-100℃~20℃范围内的热变形,实验结果与文献数据吻合良好,验证了该系统具有较高可靠性与准确性。其次,利用该系统对不同TiO2含量的二氧化钛/聚酰亚胺(TiO2/PI)纳米杂化薄膜进行低温(-60℃~18℃)单轴拉伸实验,获得了不同含量TiO2/PI纳米杂化薄膜低温应力-应变曲线、弹性模量及泊松比,结果表明:不同含量的TiO2/PI薄膜随温度降低,其应力-应变曲线线性趋势加强,弹性模量均有不同程度的提高,随着TiO2纳米颗粒的引入和含量的增加,TiO2/PI薄膜弹性模量也有明显提高;而TiO2/PI薄膜泊松比随温度的下降和TiO2颗粒的引入,均有不同程度的降低,但纯PI薄膜泊松比的降低随温度的下降并不显著。
英文摘要:
      The development of application study of low temperature deformation measuring and testing technology based on digital image correlation (DIC) method is of great significance to the investigation on material mechanical properties at low temperature. In this paper, firstly, a measuring system suitable for thin film material full field deformation measurement at low temperature was established, by combining the digital image correlation method with the low temperature tensile system. Using this system, the thermal deformation of pure copper thin film was measured in a range of -100℃ to 20℃. Experimental results are in good agreement with the literature data, which validates the higher reliability and accuracy of this system. Secondly, by using the same system, uniaxial tensile experiment was carried out for TiO2/PI nano-hybrid thin film with different titanium dioxide/polyimide contents and within a temperature range of -60℃~18℃, its stress-strain curve, elastic modulus and Poisson's ratio were obtained. Experimental results show that with the decrease of temperature, stress-strain curve linear trend of thin film with different TiO2/PI contents enhances, and elastic modulus increases in varying degrees. With introduced TiO2 nanoparticles and its content increase, its elastic modulus also increased obviously. While Poisson's ratio of TiO2/Pl thin film decreases in varying degrees with the decrease of temperature and introduced TiO2 nanoparticles, but Poisson's ratio of pure PI thin film does not decrease significantly with the decrease of temperature.
查看全文  查看/发表评论  下载PDF阅读器
关闭

版权所有:《实验力学》编辑部
您是本站第 1628527 位访问者,今日一共访问1003次,当前在线人数: 22
技术支持:本系统由北京勤云科技发展有限公司设计