• 首页 | 期刊简介 | 编委会 | 投稿须知 | 出版道德规范 | 下载专区 | English
吕琪,高经武,武晋文*,王学怀.基于数字图像相关方法的鲁灰花岗岩断裂特性研究[J].实验力学,2018,33(4):627~633
基于数字图像相关方法的鲁灰花岗岩断裂特性研究
Study of fracture characteristics of Lu-grey granite based on digital image correlation method
投稿时间:2017-11-08  修订日期:2018-02-11
DOI:10.7520/1001-4888-17-235
中文关键词:  鲁灰花岗岩  SC3PB  断裂韧度  数字图像  过程区
英文关键词:Lu-grey granite  SC3PB  fracture toughness  digital image  process zone
基金项目:国家自然科学基金青年基金资助项目(51504220)
作者单位
吕琪 中北大学 理学院 山西太原 030051 
高经武 中北大学 理学院 山西太原 030051 
武晋文* 中北大学 理学院 山西太原 030051 
王学怀 中北大学 理学院 山西太原 030051 
摘要点击次数: 637
全文下载次数: 347
中文摘要:
      采用单边直裂纹三点弯曲梁(SC3PB)对鲁灰花岗岩I型裂纹的断裂特性进行了实验研究,得到其断裂韧度为0.9~1.4MN/m1.5。基于数字图像相关方法(DIC)分析了峰值载荷前试件断裂位移场及应变场的演化过程,根据位移场的不连续性给出过程区的扩展轨迹,由应变场得到了高应变区域的变化规律。当局部水平位移梯度发生剧烈变化时,鲁灰花岗岩I型断裂进入过程区;且以水平方向应变达到0.11%~0.20%时作为进入过程区的门槛值;并进一步给出了过程区尖端沿竖直方向的扩展速率与过程区长度呈三次多项式递增关系。
英文摘要:
      Fracture characteristics of mode I crack of Lu-grey granite was experimentally studied by single-sided straight crack three-point bending beam (SC3PB), and its fracture toughness was 0.9~1.4MN/m1.5. Based on the digital image correlation (DIC) method, the evolution of the displacement field and strain fields of specimen before peak load were analyzed. According to the discontinuity of displacement field, the extended trajectory of process zone was given and the variation pattern of high strain region was obtained from the strain field.When the local horizontal displacement gradient changes drastically, the type I fracture of the Lu-grey granite enters the process zone. When the strain in the horizontal direction reaches 0.11%~0.20%, it is used as the threshold value of entering the process zone. Furthermore, the expansion rate of the tip of the process zone in the vertical direction and the length of the process zone are given a cubic polynomial increment relationship.
查看全文  下载PDF阅读器
关闭

版权所有:《实验力学》编辑部
您是本站第 65193167 位访问者,今日一共访问557次,当前在线人数: 0
技术支持:本系统由北京勤云科技发展有限公司设计