| 马宇,雷振坤*,冯洋,白瑞祥*.剪切增稠液改性软织物的单纱拉出测试研究[J].实验力学,2019,34(4):563~573 |
| 剪切增稠液改性软织物的单纱拉出测试研究 |
| Study on single-yarn pullout test of flexible fabric modified by shear thickening fluid |
| 投稿时间：2018-11-05 修订日期：2018-12-17 |
| DOI：10.7520/1001-4888-18-243 |
| 中文关键词: 剪切增稠液 能量吸收 剪切变形 柔性织物 |
| 英文关键词:STF energy absorption shear deformation flexible fabric |
| 基金项目:国家自然科学基金(11772081, 11472070, 11572070)资助 |
|
| 摘要点击次数: 886 |
| 全文下载次数: 8979 |
| 中文摘要: |
| 剪切增稠液浸渍柔性织物是防弹织物进行表面改性的潜在方法，利用剪切增稠液剪切率与粘度的极端非线性关系可显著提高纱线拔出力与拔出能量，从而增加柔性织物的抗冲击性能。本文以SiO2为分散相、乙二醇为分散剂配置剪切增稠液，来浸渍Kevlar49平纹织物进行表面改性。对坯布与浸渍布进行纱线拔出测试，其载荷-位移曲线呈现相似趋势，均分为静摩擦与动摩擦两个阶段；与坯布的极限拔出载荷出现在静摩擦阶段不同，浸渍布的极限拔出载荷出现在动摩擦阶段，且明显大于坯布。另外，浸渍布的纱线拔出能量和面内剪切变形均有明显的提升，且与剪切增稠液的质量分数和纱线拉拔速率相关。 |
| 英文摘要: |
| The impregnation of flexible fabric with shear thickening fluid (STF) is a potential method for surface modification of bullet-proof fabrics, which can significantly increase the pullout force and pullout energy of yarns, thereby increasing the impact resistance of flexible fabrics. In this work, the STF-impregnated Kevlar 49 plain fabric with SiO2 as the disperse phase and ethylene glycol (EG) as the dispersant is prepared. The yarn pullout tests are performed on the neat fabric and the STF-impregnated fabric respectively, showing that the load-displacement curves of the neat fabric and the STF-impregnated fabric present similar tendency and can be divided into two stages of static friction and dynamic friction. Unlike the neat fabric, the ultimate pullout load of the STF-impregnated fabric occurs in the dynamic friction stage and is significantly larger than that of the neat fabric. In addition, the pullout energy and the in-plane shear deformation of the STF-impregnated fabric are significantly improved, which are related to the mass fraction of STF and the yarn pullout rates. |
| 查看全文 下载PDF阅读器 |
| 关闭 |
