• 首页 | 期刊简介 | 编委会 | 投稿须知 | 出版道德规范 | 下载专区 | English
乔洋,张盛*,刘少伟,王猛.砂岩方梁断裂过程区范围的实验确定方法[J].实验力学,2020,35(2):287~299
砂岩方梁断裂过程区范围的实验确定方法
Experimental determination method of fracture process zone of sandstone using square beam sample
投稿时间:2018-05-22  修订日期:2018-07-09
DOI:10.7520/1001-4888-18-124
中文关键词:  断裂过程区  数字图像相关法  水平位移波动性  水平应变突变性  三点弯曲梁
英文关键词:fracture process zone  digital image correlation method  volatility of horizontal displacement  transmutation of horizontal strain  three-point bending beam
基金项目:国家自然科学基金面上项目(No.51674101, 51704098);河南省重点实验室开放基金(S201605)
作者单位
乔洋 河南理工大学 能源科学与工程学院 河南焦作 454001 
张盛* 1.河南理工大学 能源科学与工程学院 河南焦作 4540012.煤炭安全生产河南省协同创新中心 河南焦作 454001 
刘少伟 河南理工大学 能源科学与工程学院 河南焦作 454001 
王猛 河南理工大学 能源科学与工程学院 河南焦作 454001 
摘要点击次数: 684
全文下载次数: 264
中文摘要:
      裂纹前端的断裂过程区是引起岩石非线性断裂及尺寸效应的主要原因。利用数字图像相关技术对砂岩开展了三点弯曲梁实验,获得观测区域高精度的全场位移和应变数据,根据断裂韧带区域水平位移和水平应变的分布特征,结合裂尖岩石颗粒变化的微观分析,提出采用裂纹尖端水平位移波动性和水平应变突变性所得到的波动系数和水平应变突变值,确定断裂过程区形状和临界尺寸的方法。结果表明:砂岩断裂过程区的形状为不规则的狭长带状区域,断裂过程区的临界长度为11~13mm,临界宽度为1.58~2.36mm。断裂过程区区域内形变在趋向裂尖时呈指数增加,但其单位区域内的形变增量呈波动状态。该方法能够更加准确判断岩石断裂过程区的范围,有助于分析岩石的非线性断裂特性。
英文摘要:
      The fracture process zone around crack front is the main cause of non-linear fracture and size effect of rock. In this paper, three-point bending test was carried out for beams made of sandstones, and high-precision full-field displacement and strain data are obtained by using the digital image correlation technology. According to horizontal displacement and strain distributions in the fractured ligament region as well as the microscopic change of the fractured rock particles, a method to determine the shape and critical dimension of the fracture process zone is proposed based on the fluctuation of horizontal displacement and the mutation of horizontal strain at the crack tip. The results showed that the shape of the fracture process zone is irregular and narrow striped zone with the critical length of 11~13mm and the critical width of 1.58~2.36mm. The deformation in the fracture process increases exponentially as it approaches the crack tip, but the deformation increment in the unit area reveals fluctuation. This method can more accurately determine the extent of the rock fracture process zone and help to analyze the nonlinear fracture characteristics of rocks.
查看全文  下载PDF阅读器
关闭

版权所有:《实验力学》编辑部
您是本站第 65259219 位访问者,今日一共访问446次,当前在线人数: 0
技术支持:本系统由北京勤云科技发展有限公司设计