• 首页 | 期刊简介 | 编委会 | 投稿须知 | 出版道德规范 | 下载专区 | English
黄宏*,罗苏阳,杨超,谢力,徐传国.组合式十字形钢管混凝土柱偏压力学性能试验研究[J].实验力学,2020,35(2):309~318
组合式十字形钢管混凝土柱偏压力学性能试验研究
Experimental study on mechanical behavior of combined cruciform concrete filled steel tubular column under eccentric compression
投稿时间:2018-07-13  修订日期:2018-10-10
DOI:10.7520/1001-4888-18-163
中文关键词:  组合式十字形  钢管混凝土  异形柱  偏压  荷载-应变关系
英文关键词:combined cruciform  concrete filled steel  special-shaped column  eccentric compression  load-strain relationship
基金项目:国家自然科学基金项目(51868020),江西省青年科学基金资助项目(20171BAB216044)
作者单位
黄宏* 1.华东交通大学 土木建筑学院 江西南昌 330013 2.江西省建筑过程模拟与控制重点实验室 江西南昌 330013 
罗苏阳 1.华东交通大学 土木建筑学院 江西南昌 330013 2.江西省建筑过程模拟与控制重点实验室 江西南昌 330013 
杨超 1.华东交通大学 土木建筑学院 江西南昌 330013 2.江西省建筑过程模拟与控制重点实验室 江西南昌 330013 
谢力 1.华东交通大学 土木建筑学院 江西南昌 330013 2.江西省建筑过程模拟与控制重点实验室 江西南昌 330013 
徐传国 1.华东交通大学 土木建筑学院 江西南昌 330013 2.江西省建筑过程模拟与控制重点实验室 江西南昌 330013 
摘要点击次数: 997
全文下载次数: 0
中文摘要:
      设计了一种由槽钢和方形钢管拼焊形成的组合式十字形钢管混凝土柱,将其灵活地布置在框架结构的中节点,可使柱肢与填充墙等厚,有效地提高建筑使用面积。共制作了6根组合式十字形钢管混凝土柱试件,考虑了偏心距和长细比两种变化参数。通过对其进行偏心受压试验研究,考察了试件的破坏形态和荷载-挠度曲线,并分析了其在不同偏心距和长细比下的荷载-应变曲线发展规律。结果表明:组合式十字形钢管混凝土柱中钢管和槽钢对混凝土的约束作用强,表现为较高的延性系数;偏心距或长细比越大,试件的极限承载力及弹性刚度越小,且偏心距越大延性越好,长细比对延性影响不显著;在受拉侧纵向应变基本上符合平截面假定,在受压侧纵向应变不符合平截面假定。
英文摘要:
      One kind of combined cruciform concrete filled steel tubular columns made of channel steel and square steel tube is presented. The thickness of column leg can be equal to filler wall and the usable floor area of buildings can be effectively increased when the columns are arranged flexibly on the middle joint of frame structures. Six combined concrete filled steel tubular columns are designed and fabricated with the slenderness ratio and eccentricity as variable parameters. Through the eccentric compression, the failure pattern and load-deflection curve of the specimens are investigated, and the development laws of load-strain relationship corresponding to different eccentricity and slenderness ratio are analyzed. It is shown that the steel tube and channel steel in the combined cruciform concrete filled steel tubular column have strong constraint on the concrete and show better ductility. With the increase of eccentricity or slenderness ratio, the ultimate bearing capacity and elastic stiffness of the specimens decrease. The greater the eccentricity is, the better the ductility is, while the slenderness ratio has no significant effect on ductility. Moreover, the longitudinal strain on the tension side is basically in accordance with the plane cross-section assumption, while the longitudinal strain on the compression side is not in accordance with the plane cross-section assumption.
查看全文  下载PDF阅读器
关闭

版权所有:《实验力学》编辑部
您是本站第 65194541 位访问者,今日一共访问1301次,当前在线人数: 0
技术支持:本系统由北京勤云科技发展有限公司设计