• 首页 | 期刊简介 | 编委会 | 投稿须知 | 出版道德规范 | 下载专区 | English
傅愉*,陈冰,阎可宇,缪泓,于起峰.综述:面向工程应用的激光干涉动态测量[J].实验力学,2021,36(1):1~16
综述:面向工程应用的激光干涉动态测量
Engineering-oriented laser interferometric dynamic measurement: a review
投稿时间:2020-04-06  修订日期:2020-05-05
DOI:10.7520/1001-4888-20-061
中文关键词:  动态测量  激光干涉  变形测量  振动测量  激光多普勒测振技术
英文关键词:dynamic measurement  laser interferometry  deformation measurement  vibration measurement  laser Doppler vibrometry
基金项目:国家自然科学基金(11972235)资助
作者单位
傅愉* 1.深圳大学 物理与光电工程学院, 广东深圳 518060
2.深圳大学 智能光测研究院 广东深圳 518060 
陈冰 1.深圳大学 物理与光电工程学院, 广东深圳 518060
2.深圳大学 智能光测研究院 广东深圳 518060 
阎可宇 1.深圳大学 物理与光电工程学院, 广东深圳 518060
2.深圳大学 智能光测研究院 广东深圳 518060 
缪泓 中国科学技术大学 近代力学系 安徽合肥 230027 
于起峰 1.深圳大学 物理与光电工程学院, 广东深圳 518060
2.深圳大学 智能光测研究院 广东深圳 518060
3.国防科技大学 空天科学学院, 湖南长沙 410073 
摘要点击次数: 1482
全文下载次数: 3496
中文摘要:
      进入21世纪之后,激光干涉作为一种成熟的非接触式动态测量技术,开始逐步应用于不同的工业领域。激光干涉动态测量技术主要分成两类:一类是基于高速相机的干涉测量技术,而另一类则是基于单像素光电探测器的干涉测量技术。这两类技术都有其局限性:基于高速相机的技术受限于相机时间轴上的采样率;而基于光电探测器的技术则在空间域上只能进行单点测量。针对稳态振动和非稳态振动/变形测量两种实际应用,本文分别讨论了这两类干涉测量技术近年来的一些最新发展。作者希望通过本文的讨论为不同领域的研究人员和工程师在实际应用中选取更优的动态测量方案提供有力的参考。
英文摘要:
      Since the beginning of the 21st century, laser interferometry, as a mature non-contact dynamic measurement technology, has been applied to various industrial areas. It can be divided into two categories: high-speed camera-based and photodetector-based technologies, respectively. Both types of technologies have their own limitations: high-speed camera-based technologies are limited by the capturing rate; while photodetector-based technologies can only perform single-point measurements. Aiming at two practical applications of steady-state vibration and unsteady-state vibration or deformation, this review discusses some of the latest developments of both technologies. The authors hope the review would throw some light on the guidelines when the researchers and engineers in different areas choose better measurement solutions for various applications.
查看全文  下载PDF阅读器
关闭

网站版权:《实验力学》编辑部
您是本站第 65591945 位访问者,今日一共访问953次,当前在线人数: 0
技术支持:本系统由北京勤云科技发展有限公司设计