• 首页 | 期刊简介 | 编委会 | 投稿须知 | 出版道德规范 | 下载专区 | English
张延新*,曹龙辉,李泽杰,陈天星.不同循环加载应力下花岗岩Kaiser效应特征的试验研究[J].实验力学,2021,36(1):123~132
不同循环加载应力下花岗岩Kaiser效应特征的试验研究
Experimental study on Kaiser effect characteristics of granite under different cyclic loading stresses
投稿时间:2020-02-28  修订日期:2020-06-21
DOI:10.7520/1001-4888-20-039
中文关键词:  循环加载  Kaiser效应  Felicity比  声发射  地应力
英文关键词:cyclic loading  Kaiser effect  Felicity ratio  acoustic emission  in-situ stress
基金项目:
作者单位
张延新* 1.燕山大学 建筑工程与力学学院 河北秦皇岛 0660042.燕山大学 河北省土木工程绿色建造与智能运维重点实验室, 河北秦皇岛 066004 
曹龙辉 燕山大学 建筑工程与力学学院 河北秦皇岛 066004 
李泽杰 燕山大学 建筑工程与力学学院 河北秦皇岛 066004 
陈天星 燕山大学 建筑工程与力学学院 河北秦皇岛 066004 
摘要点击次数: 507
全文下载次数: 121
中文摘要:
      为了更准确地获取花岗岩的Kaiser效应点对应的应力值σAE,利用RMT-100B岩石力学伺服试验机和Micro-Ⅱ Express型声发射监测系统,研究不同循环加载应力σic下岩石Kaiser效应特征。结果表明:相比单次加载,在循环加载作用下,试样的应力-应变曲线在加载初期下凸减弱,压密阶段变短;由于试样的加卸载曲线不能重合而形成的滞回环,随着循环次数和循环应力水平的增大,朝着应变增大的方向移动;当σic<先期最大应力σm时,摩擦型声发射现象被有效地减弱,这有利于后续加载过程中Kaiser效应点的识别;当σicm时,振铃累计计数曲线呈台阶状上升,岩石内部发生裂纹的扩展或新裂纹的孕育,该循环应力成为新的记忆应力。当σicm时,Felicity比小于1,反之大于1,因此,在地应力测试中,可以采用低应力、小梯度的循环加卸载方式,并结合Felicity比,进而缩小Kaiser效应点的识别范围,提高地应力测量精度。
英文摘要:
      In order to obtain the stress value σAEcorresponding to the Kaiser effect point of granite more accurately, the influences of different cyclic loading stress σic on the Kaiser effect characteristics are studied by the RMT-100B rock mechanics servo testing machine and the Micro-Ⅱ Express acoustic emission monitoring system. The results show that, under the cyclic loading the stress-strain curve of the specimen becomes less convex at the initial loading stage and shorter at the compaction stage, in comparison with that under the single loading. When σicm, the frictional acoustic emission is effectively weakened, conducive to the identification of Kaiser effect points in the subsequent loading process. When σicm, the cumulative ringing count curve rises in steps, the extension of cracks and the initiation of new cracks occur inside the rocks, and the cyclic stress becomes a new memory stress. When σicm, the Felicity ratio is less than 1. Otherwise it is more than 1. Therefore, in the in-situ stress test, a cyclic loading and unloading method with low stress and small gradient can be adopted, and the effective stress interval of the Kaiser effect can be screened by the Felicity ratio, reducing the recognition range of the Kaiser effect point and improving the accuracy of the in-situ stress measurement.
查看全文  下载PDF阅读器
关闭

版权所有:《实验力学》编辑部
您是本站第 65262235 位访问者,今日一共访问456次,当前在线人数: 0
技术支持:本系统由北京勤云科技发展有限公司设计