• 首页 | 期刊简介 | 编委会 | 投稿须知 | 出版道德规范 | 下载专区 | English
焦敬品*,刘芸,吴斌,何存富.金属板结构疲劳损伤二倍频兰姆波检测方法研究[J].实验力学,2021,36(2):157~166
金属板结构疲劳损伤二倍频兰姆波检测方法研究
Fatigue damage detection in metal plates using second harmonic Lamb waves
投稿时间:2020-04-21  修订日期:2020-06-17
DOI:10.7520/1001-4888-20-072
中文关键词:  二倍频兰姆波  疲劳损伤  非线性超声  极性反转法  无损检测
英文关键词:second harmonic Lamb wave  fatigue damage  nonlinear acoustic  polarity reversal method  nondestructive testing
基金项目:国家自然科学基金项目资助(11772013、 11972053)
作者单位
焦敬品* 北京工业大学 机械工程与应用电子技术学院, 北京 100124 
刘芸 北京工业大学 机械工程与应用电子技术学院, 北京 100124 
吴斌 北京工业大学 机械工程与应用电子技术学院, 北京 100124 
何存富 北京工业大学 机械工程与应用电子技术学院, 北京 100124 
摘要点击次数: 827
全文下载次数: 140
中文摘要:
      针对重大基础设施安全运行需要,本文进行了金属板结构疲劳损伤非线性兰姆波检测方法研究。基于兰姆波二次谐波产生条件,确定了产生二次谐波积累增长效应的两种兰姆波模态及对应的激励频率。通过有限元仿真,研究了材料性能改变对兰姆波非线性效应的影响,证明了二倍频兰姆波非线性系数对材料性能退化表征的有效性。在此基础上,开展了金属板结构疲劳损伤非线性兰姆波检测实验研究。将极性反转方法应用于疲劳试件检测实验中,有效提高了检测信号中二倍频兰姆波的幅值和信噪比。实验结果表明,两种兰姆波模态对的二次谐波非线性系数均随疲劳损伤增加呈线性增长趋势,但基频S(0,2)模态和二倍频S(0,4)模态对对疲劳损伤检测的灵敏度更高,更适合金属板结构疲劳损伤检测。
英文摘要:
      For the safe operation of critical infrastructure, a nonlinear Lamb wave technique is proposed for fatigue damage detection in metal plates. Based on the second harmonic generation conditions of the Lamb wave, the two Lamb wave modes and corresponding excitation frequencies that can produce the second harmonic accumulation growth effect are determined. The effect of material properties change on the nonlinear effect is investigated by the finite element simulation, which proves the validity of the two harmonic nonlinear coefficients for the characterization of material properties degradation. The nonlinear Lamb wave experiments are conducted to detect fatigue damage in metal plates. The polarity inversion method is applied to the fatigue specimen detection experiments, which can effectively improve the amplitude and signal-to-noise ratio of the harmonic components in the detection signals. The experimental results show that the second harmonic nonlinear coefficients of both Lamb wave mode pairs increase linearly with the increase of fatigue damage, but the mode pair consisting of fundamental S(0,2) and harmonic S(0,4) is more sensitive for fatigue damage detection and is more suitable for fatigue damage detection f metal plates.
查看全文  下载PDF阅读器
关闭

网站版权:《实验力学》编辑部
您是本站第 65667649 位访问者,今日一共访问406次,当前在线人数: 0
技术支持:本系统由北京勤云科技发展有限公司设计