• 首页 | 期刊简介 | 编委会 | 投稿须知 | 出版道德规范 | 下载专区 | English
范成年,张磊,单俊芳,王鹏飞,徐松林*.复合纸蜂窝结构的力学性能与吸能特性研究[J].实验力学,2021,36(5):627~637
复合纸蜂窝结构的力学性能与吸能特性研究
The mechanical performance and energy absorption properties of composite paper honeycomb structures
投稿时间:2021-01-05  修订日期:2021-02-19
DOI:10.7520/1001-4888-21-001
中文关键词:  纸蜂窝  组合结构  抗压实验  力学性能  吸能特性
英文关键词:paper honeycomb  combinative structure  compression experiment  mechanical performance  energy absorption property
基金项目:国家自然科学基金 (11672286, 11602267, 11472264, 11872361), 中石油与中科院重大战略合作项目(2015A-4812), 安徽省自然科学基金(1708085MA05) 资助
作者单位
范成年 中国科学技术大学 中国科学院材料力学行为和设计重点实验室 安徽合肥 230027 
张磊 中国科学技术大学 中国科学院材料力学行为和设计重点实验室 安徽合肥 230027 
单俊芳 中国科学技术大学 中国科学院材料力学行为和设计重点实验室 安徽合肥 230027 
王鹏飞 中国科学技术大学 中国科学院材料力学行为和设计重点实验室 安徽合肥 230027 
徐松林* 中国科学技术大学 中国科学院材料力学行为和设计重点实验室 安徽合肥 230027 
摘要点击次数: 841
全文下载次数: 250
中文摘要:
      本文对不同类型、不同组合的Aramid纸蜂窝结构进行了抗压实验,并与单层蜂窝的抗压实验结果进行对比,总结其力学性能和吸能特性。组合的类型包括不带隔板的2个规格相同的蜂窝组合,以及包含铝隔板的相同规格的2个蜂窝组合。结果表明,复合纸蜂窝结构具有一定的应变率效应,并且其吸能特性远优于单层纸蜂窝,加入铝隔板的纸蜂窝吸能特性会进一步提升。为了验证实验结果,基于数值方法建立了合理的分析模型,计算结果与实验结果吻合较好。研究结果表明,含有铝隔板的组合适用于需要较大坍塌应力的防撞结构中,而无隔板组合适用于需减小初始破坏应力的阻尼吸能结构中。
英文摘要:
      Two aramid paper honeycomb structures with different types and combinations have been tested under compression, and compared with those of single aramid paper honeycomb. The mechanical performance and energy absorption properties of them have been analyzed. The types of combination include two honeycomb combinations of the same size without partition and two honeycomb combinations of the same size with aluminum partition. The results show that the double-layer honeycomb composite structure has a certain strain rate effect, and its energy absorption characteristics are far better than that of single-layer paper honeycomb, improving the energy absorption characteristics of paper honeycomb with aluminum partition. In order to verify the experimental results, a reasonable analysis model is established based on the numerical method, and the calculated results are in good agreement with the experimental ones. The combination with aluminum diaphragms is suitable for the anti-collision structure which needs larger collapse stress, while the combination without aluminum diaphragms is suitable for the damping energy absorbing structure which needs to reduce the initial failure stress.
查看全文  下载PDF阅读器
关闭

网站版权:《实验力学》编辑部
您是本站第 65668502 位访问者,今日一共访问833次,当前在线人数: 0
技术支持:本系统由北京勤云科技发展有限公司设计