• 首页 | 期刊简介 | 编委会 | 投稿须知 | 出版道德规范 | 下载专区 | English
易见为,苏志龙,关棒磊*,李璋,张东升,于起峰.野外大视场双目像机外参数自标定方法[J].实验力学,2022,37(6):775~783
野外大视场双目像机外参数自标定方法
Self-calibration method of external parameters of binocular camera with large field of view
投稿时间:2021-09-10  修订日期:2021-10-26
DOI:10.7520/1001-4888-21-211
中文关键词:  外参数标定  对极几何约束  随机样本一致性算法(RANSAC)  全局优化
英文关键词:camera calibration  epipolar geometry constraint  RANSAC  global optimization
基金项目:国家自然基金重大科研仪器研制项目(11727804);国家自然科学基金(11902349);湖南省自然科学基金(2020JJ5645)资助
作者单位
易见为 国防科技大学 空天科学学院, 图像测量与视觉导航湖南省重点实验室, 湖南长沙 410073 
苏志龙 上海大学 力学与工程学院, 上海应用数学和力学研究所, 上海市能源工程力学重点实验室, 上海 200444 
关棒磊* 国防科技大学 空天科学学院, 图像测量与视觉导航湖南省重点实验室, 湖南长沙 410073 
李璋 国防科技大学 空天科学学院, 图像测量与视觉导航湖南省重点实验室, 湖南长沙 410073 
张东升 上海大学 力学与工程学院, 上海应用数学和力学研究所, 上海市能源工程力学重点实验室, 上海 200444 
于起峰 国防科技大学 空天科学学院, 图像测量与视觉导航湖南省重点实验室, 湖南长沙 410073 
摘要点击次数: 1064
全文下载次数: 106
中文摘要:
      针对野外大视场双目像机外参数标定困难的情况,提出利用无人机携带标志作为场景点进行现场外参数自标定的方法。通过控制无人机在双目像机大视场范围内飞行,利用双目像机对无人机拍摄并跟踪,无人机的位置可作为动态场景点进行外参数标定,该方法易满足动态场景点在大视场中均匀散布的要求;同时针对图像同名点对存在野值点以及优化算法容易收敛到局部最优解的问题,采用了图割优化方法进行野值点剔除,并通过全局最优解方法进行外参数精确求解。对比验证实验表明,该方法的标定精度优于传统方法,能够有效解决野外大视场双目像机外参数标定难题。
英文摘要:
      Aiming at the difficulty of external parameter calibration of field binocular camera with large field of view, a method of external parameter calibration using UAV signs as scene points is proposed. The UAV was controlled to fly in the large field of view of the binocular camera. Then the UAV was photographed and tracked by the binocular camera. The position of the UAV can be used as the control point for external parameter calibration. This method is easy to meet the requirements of uniform distribution of control points in the large field of view. There are outliers with the same name point pair of the image and the algorithm is easy to converge to the local optimal solution. In order to solve the problems, the graph cut optimization method was used to eliminate the outliers, and then the external parameters were accurately solved by the global optimal solution method. Comparative verification experiments show that the calibration accuracy of this method is better than the traditional method, and can effectively solve the problem of external parameter calibration of field large field binocular camera.
查看全文  下载PDF阅读器
关闭

版权所有:《实验力学》编辑部
您是本站第 65245234 位访问者,今日一共访问779次,当前在线人数: 0
技术支持:本系统由北京勤云科技发展有限公司设计