• 首页 | 期刊简介 | 编委会 | 投稿须知 | 下载专区 | 联系我们 | English
唐颖,姚骏,陈巨兵*.一种基于投影云纹法的三维形貌测量技术及其标定方法[J].实验力学,2018,33(5):665~674
一种基于投影云纹法的三维形貌测量技术及其标定方法
A 3-D profile measurement technique and its calibration method based on projected moiré method
投稿时间: 2017-05-19  最后修改时间: 2017-06-23
DOI:10.7520/1001-4888-17-116
中文关键词:  投影云纹  表面形貌  灵敏度系数  系统标定
英文关键词:projected moiré  surface topography  sensitivity coefficient  system calibration
基金项目:国家自然科学基金No.11372182支持
作者单位
唐颖 上海交通大学力学系, 上海 200240 
姚骏 上海交通大学力学系, 上海 200240 
陈巨兵* 上海交通大学力学系, 上海 200240 
摘要点击次数: 89
全文下载次数: 35
中文摘要:
      投影云纹法测量物体的三维形貌具有非接触式、快速、全场测量的优势,且计算结果的分辨率和精度都很高。本文提出了一种新的投影云纹系统测量三维形貌的计算和标定方法,这种方法适用于由投影仪直接投影栅线的投影云纹系统,对光路没有特殊相对位置要求,标定过程对设备的要求低,简单易行,仅需一大一小两块平整的标定板即可实现对整个系统的标定。其可行性、正确性以及高精度的特点都被真实物体测量证实。
英文摘要:
      Projected moiré method used for 3-D object profile measurement has the advantages of non-contact, rapid and full field measurement, and the resolution and accuracy of calculated results are very high. In this paper, new computing and calibrating methods for 3-D profile measurement by projected moiré system are proposed. This method is suitable for a projected moiré system which is directly projecting grid line by projector and has no special relative position requirement for optical paths. The calibration process has only low requirements of equipment and is easy to operate. The calibration of whole system can be realized by using two flat calibration plates: one is large, the other one is small. Its feasibility, correctness and high accuracy are verified by real object measurement.
查看全文  查看/发表评论  下载PDF阅读器
关闭

版权所有:《实验力学》编辑部
您是本站第 1706378 位访问者,今日一共访问247次,当前在线人数: 22
技术支持:本系统由北京勤云科技发展有限公司设计